Explain ways to get rid of the brake siren and its main reasons
Explain ways to get rid of the brake siren and its main reasons
Welcome to the mechanics of life, through this topic, we will address a very important topic, where we will learn the most important reasons that led to the whistle and the methods of scrapping, many owners complain that when press the brake pedal, it is when the brake produces an annoying sound. And shame is a high whistle, and the main reasons for such whistling are:
- Brake linings or linings or brake linings, when damaged and their iron contacts with the brake disc cause an acute whistling and are due to the end of the life of the seals,
- The other reason is due to the delay in the timely replacement of the brake pads, which damages the brake disc, which necessitates compression of the brakes, i.e. The brakes. The parts of the car, when used properly and last longer, are nested. If a part is damaged, other parts may be damaged. And it is always advisable to change pad after 3 times, if you change them before touching the iron, between the disc and the bells.
For example, change the brake pads and your car will whistle when you press the brakes. Here you should check the brake disc as it poses such problems and may show you symptoms of non-whistling at the steering wheel, such as shaking or shaking the steering wheel during braking, and the disc must then be rotated. ,
In the case of mapping the "disk" and the change of throat, but you hear the beep of the brake, the problem may be related to the accumulation of dust and water or dust on your car, this that raises the problem,
Suppose you check the brakes and find no dust, water, dust, etc.
Here you can follow this method to get rid of the brake whistling, as final:
Some of the new joints must be sanded with a soft radiator, indicated by a red color above the line, with a very simple depth of only 2 mm, so that the sound of whistling
Comments